Overview of ICARUS-A Curated, Open Access, Online Repository for Atmospheric Simulation Chamber Data.

Atmospheric simulation chambers continue to be indispensable tools for research in the atmospheric sciences. Insights from chamber studies are integrated into atmospheric chemical transport models, which are used for science-informed policy decisions. However, a centralized data management and access infrastructure for their scientific products had not been available in the United States and many parts of the world. ICARUS (Integrated Chamber Atmospheric data Repository for Unified Science) is an open access, searchable, web-based infrastructure for storing, sharing, discovering, and utilizing atmospheric chamber data [https://icarus.ucdavis.edu]. ICARUS has two parts: a data intake portal and a search and discovery portal. Data in ICARUS are curated, uniform, interactive, indexed on popular search engines, mirrored by other repositories, version-tracked, vocabulary-controlled, and citable. ICARUS hosts both legacy data and new data in compliance with open access data mandates. Targeted data discovery is available based on key experimental parameters, including organic reactants and mixtures that are managed using the PubChem chemical database, oxidant information, nitrogen oxide (NOx) content, alkylperoxy radical (RO2) fate, seed particle information, environmental conditions, and reaction categories. A discipline-specific repository such as ICARUS with high amounts of metadata works to support the evaluation and revision of atmospheric model mechanisms, intercomparison of data and models, and the development of new model frameworks that can have more predictive power in the current and future atmosphere. The open accessibility and interactive nature of ICARUS data may also be useful for teaching, data mining, and training machine learning models.

Kinetics of oligomer-forming reactions involving the major functional groups present in atmospheric secondary organic aerosol particles.

Atmospheric organic aerosol particles impact climate as well as human and environmental health. Secondary organic aerosol (SOA), which is formed by the gas-to-particle partitioning of products of the oxidation of volatile organic compounds (VOCs) emitted from biogenic or anthropogenic sources, contributes a large fraction of this material. In the particle phase, these products can undergo accretion reactions to form oligomers that impact the formation, composition, and chemical-physical properties of aerosols. While these reactions are known to occur in the atmosphere, data and models describing their kinetics and equilibria are sparse. Here, reactions of compounds containing potentially reactive hydroperoxide, hydroxyl, carboxyl, aldehyde, and ketone groups were investigated in single and phase-separated organic/aqueous mixtures in the absence and presence of a sulfuric acid catalyst. Compounds containing these groups and a nonreactive UV-absorbing nitrate group were synthesized and their reactions and products were monitored and characterized using high-performance liquid chromatography with UV detection (HPLC-UV), electrospray ionization-mass spectrometry (ESI-MS), and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. Reactions were observed between hydroperoxides and aldehydes to form peroxyhemiacetals, and between carboxylic acids and alcohols to form esters, and their rate and equilibrium constants were determined. No reactions were observed in other mixtures, indicating that under the conditions of these experiments only a few reaction pathways form oligomers. Reactions were also conducted with probe compounds and SOA formed in an environmental chamber reaction of α-pinene with O3. Whereas in a previous study we observed a rapid hydroperoxide reaction in this SOA, among the other compounds studied here only alcohols reacted. These results provide insight into the types of accretion reactions that are likely to occur in atmospheric aerosols, and the rate and equilibrium constants can be used to better model SOA chemistry.

Reactive Chlorine Emissions from Cleaning and Reactive Nitrogen Chemistry in an Indoor Athletic Facility.

Indoor gas-phase radical sources are poorly understood but expected to be much different from outdoors. Several potential radical sources were measured in a windowless, light-emitting diode (LED)-lit room in a college athletic facility over a 2 week period. Alternating measurements between the room air and the supply air of the heating, ventilation, and air-conditioning system allowed an assessment of sources. Use of a chlorine-based cleaner was a source of several photolabile reactive chlorine compounds, including ClNO2 and Cl2. During cleaning events, photolysis rates for these two compounds were up to 0.0023 pptv min-1, acting as a source of chlorine atoms even in this low-light indoor environment. Unrelated to cleaning events, elevated ClNO2 was often observed during daytime and lost to ventilation. The nitrate radical (NO3), which is rapidly photolyzed outdoors during daytime, may persist in low-light indoor environments. With negligible photolysis, loss rates of NO3 indoors were dominated by bimolecular reactions. At times with high NO2 and O3 ventilated from outdoors, N2O5 was observed. Elevated ClNO2 measured concurrently suggests the formation through heterogeneous reactions, acting as an additional source of reactive chlorine within the athletic facility and outdoors.

Chemistry of Secondary Organic Aerosol Formation from Reactions of Monoterpenes with OH Radicals in the Presence of NOx.

The oxidation of volatile organic compounds (VOCs), which are emitted to the atmosphere from natural and anthropogenic sources, leads to the formation of ozone and secondary organic aerosol (SOA) particles that impact air quality and climate. In the study reported here, we investigated the products of the reactions of five biogenic monoterpenes with OH radicals (an important daytime oxidant) under conditions that mimic the chemistry that occurs in polluted air, and developed mechanisms to explain their formation. Experiments were conducted in an environmental chamber, and information on the identity of gas-phase molecular products was obtained using online mass spectrometry, while liquid chromatography and two methods of functional group analysis were used to characterize the SOA composition. The gas-phase products of the reactions were similar to those formed in our previous studies of the reactions of these monoterpenes with NO3 radicals (an important nighttime oxidant), in that they all contained various combinations of nitrate, carbonyl, hydroxyl, ester, and ether groups. But in spite of this, less SOA was formed in OH/NOx reactions and it was composed of monomers, while SOA formed in NO3 radical reactions consisted of acetal and hemiacetal oligomers formed by particle-phase accretion reactions. In addition, it appeared that some monomers underwent particle-phase hydrolysis, whereas oligomers did not. These differences are due primarily to the arrangement of hydroxyl, carbonyl, nitrate, and ether groups in the monomers, which can in turn be explained by differences in OH and NO3 radical reaction mechanisms. The results provide insight into the impact of VOC structure on the amount and composition of SOA formed by atmospheric oxidation, which influence important aerosol properties such as volatility and hygroscopicity.

Secondary Organic Aerosol Mass Yields from NO3 Oxidation of α-Pinene and Δ-Carene: Effect of RO2 Radical Fate.

Dark chamber experiments were conducted to study the SOA formed from the oxidation of α-pinene and Δ-carene under different peroxy radical (RO2) fate regimes: RO2 + NO3, RO2 + RO2, and RO2 + HO2. SOA mass yields from α-pinene oxidation were <1 to ∼25% and strongly dependent on available OA mass up to ∼100 µg m-3. The strong yield dependence of α-pinene oxidation is driven by absorptive partitioning to OA and not by available surface area for condensation. Yields from Δ-carene + NO3 were consistently higher, ranging from ∼10-50% with some dependence on OA for <25 µg m-3. Explicit kinetic modeling including vapor wall losses was conducted to enable comparisons across VOC precursors and RO2 fate regimes and to determine atmospherically relevant yields. Furthermore, SOA yields were similar for each monoterpene across the nominal RO2 + NO3, RO2 + RO2, or RO2 + HO2 regimes; thus, the volatility basis sets (VBS) constructed were independent of the chemical regime. Elemental O/C ratios of ∼0.4-0.6 and nitrate/organic mass ratios of ∼0.15 were observed in the particle phase for both monoterpenes in all regimes, using aerosol mass spectrometer (AMS) measurements. An empirical relationship for estimating particle density using AMS-derived elemental ratios, previously reported in the literature for non-nitrate containing OA, was successfully adapted to organic nitrate-rich SOA. Observations from an NO3- chemical ionization mass spectrometer (NO3-CIMS) suggest that Δ-carene more readily forms low-volatility gas-phase highly oxygenated molecules (HOMs) than α-pinene, which primarily forms volatile and semivolatile species, when reacted with NO3, regardless of RO2 regime. The similar Δ-carene SOA yields across regimes, high O/C ratios, and presence of HOMs, suggest that unimolecular and multistep processes such as alkoxy radical isomerization and decomposition may play a role in the formation of SOA from Δ-carene + NO3. The scarcity of peroxide functional groups (on average, 14% of C10 groups carried a peroxide functional group in one test experiment in the RO2 + RO2 regime) appears to rule out a major role for autoxidation and organic peroxide (ROOH, ROOR) formation. The consistently substantially lower SOA yields observed for α-pinene + NO3 suggest such pathways are less available for this precursor. The marked and robust regime-independent difference in SOA yield from two different precursor monoterpenes suggests that in order to accurately model SOA production in forested regions the chemical mechanism must feature some distinction among different monoterpenes.

Gas- and Particle-Phase Products and Their Mechanisms of Formation from the Reaction of Δ-3-Carene with NO3 Radicals.

Monoterpenes are a major component of the large quantities of biogenic volatile organic compounds that are emitted to the atmosphere each year. They have a variety of structures, which influences their subsequent reactions with OH radicals, O3, or NO3 radicals and the tendency for these reactions to form secondary organic aerosol (SOA). Here we report the results of an environmental chamber study of the reaction of Δ-3-carene, an abundant unsaturated C10 bicyclic monoterpene, with NO3 radicals, a major nighttime oxidant. Gas- and particle-phase reaction products were analyzed in real time and offline by using mass spectrometry, gas and liquid chromatography, infrared spectroscopy, and derivatization-spectrophotometric methods. The results were used to identify and quantify functional groups and molecular products and to develop gas- and particle-phase reaction mechanisms to explain their formation. Identified gas-phase products were all first-generation ring-retaining and ring-opened compounds (ten C10 and one C9 monomers) with 2-4 functional groups and one C20 dinitrooxydialkyl peroxide dimer. Upon partitioning to the particle phase, the monomers reacted further to form oligomers consisting almost entirely of C20 acetal and hemiacetal dimers, with those formed from a hydroxynitrate and hydroxycarbonyl nitrate comprising more than 50% of the SOA mass. The SOA contained an average of 0.94, 0.71, 0.15, 0.11, 0.16, 0.13, and 7.80 nitrate, carbonyl, hydroxyl, carboxyl, ester, peroxide, and methylene groups per C10 monomer and was formed with a mass yield of 56%. These results have important similarities and differences to those obtained from a previous similar study of the reaction of ß-pinene and yield new insights into the effects of monoterpene structure on gas- and particle-phase reactions that can lead to the formation of a large variety of multifunctional products and significant amounts of SOA.

Comprehensive Analysis of Products and the Development of a Quantitative Mechanism for the OH Radical-Initiated Oxidation of 1-Alkenes in the Presence of NOx.

The reactions of 1-tetradecene and 1-pentadecene, the C14 and C15 linear 1-alkenes, with OH radicals in the presence of NOx were investigated in a series of environmental chamber experiments. Particle-phase ß-hydroxynitrates, dihydroxynitrates, dihydroxycarbonyls, and 1,4-hydroxynitrates and gas-phase aldehydes were sampled and then identified and quantified using a suite of offline analytical techniques that included derivatization, gas and liquid chromatography, and multiple types of mass spectrometry. Measured molar yields of products formed by OH radical addition to the C═C double bond, including ß-hydroxynitrates, dihydroxynitrates, dihydroxycarbonyls (which have not been previously directly quantified with high accuracy), and aldehydes were 0.125 ± 0.01, 0.048 ± 0.005, 0.240 ± 0.04, and 0.268 ± 0.03 (0.264 ± 0.02 and 0.271 ± 0.04 for the formaldehyde and tridecanal/tetradecanal co-products of ß-hydroxyalkoxy radical decomposition), respectively. These values give a total molar yield of 0.681 ± 0.05, which agrees very well with the results of kinetics measurements that indicate that the fraction of reaction that occurs by OH radical addition is 0.70. The yields were used to calculate branching ratios for all OH radical addition pathways, including a value of 0.18 for the formation of dihydroxynitrates from the reaction of dihydroxyperoxy radicals with NO and values of 0.47 and 0.53 for ß-hydroxyalkoxy radical decomposition and isomerization. The results were used with literature data on the yields of aldehydes measured for similar reactions of smaller alkenes, a model for the effect of carbon number on branching ratios for organic nitrate formation, and a mechanism for H atom abstraction derived from studies of linear alkanes to achieve a complete, quantitative gas-phase reaction mechanism for 1-alkenes. The results should also be useful for constructing mechanisms for more complex reactions of volatile organic compounds.

Quantification and source characterization of volatile organic compounds from exercising and application of chlorine-based cleaning products in a university athletic center.

Humans spend approximately 90% of their time indoors, impacting their own air quality through occupancy and activities. Human VOC emissions indoors from exercise are still relatively uncertain, and questions remain about emissions from chlorine-based cleaners. To investigate these and other issues, the ATHLETic center study of Indoor Chemistry (ATHLETIC) campaign was conducted in the weight room of the Dal Ward Athletic Center at the University of Colorado Boulder. Using a Vocus Proton-Transfer-Reaction Time-of-Flight Mass Spectrometer (Vocus PTR-TOF), an Aerodyne Gas Chromatograph (GC), an Iodide-Chemical Ionization Time-of-Flight Mass Spectrometer (I-CIMS), and Picarro cavity ringdown spectrometers, we alternated measurements between the weight room and supply air, allowing for determination of VOC, NH3 , H2 O, and CO2 emission rates per person (emission factors). Human-derived emission factors were higher than previous studies of measuring indoor air quality in rooms with individuals at rest and correlated with increased CO2 emission factors. Emission factors from personal care products (PCPs) were consistent with previous studies and typically decreased throughout the day. In addition, N-chloraldimines were observed in the gas phase after the exercise equipment was cleaned with a dichlor solution. The chloraldimines likely originated from reactions of free amino acids with HOCl on gym surfaces.

Quantification of alkenes on indoor surfaces and implications for chemical sources and sinks.

Indoor surfaces are known to support organic films, but their thickness, composition, and variability between environments remain poorly characterized. Alkenes are expected to be a significant component of these films, with the reaction with O3 being a major sink for O3 and source of airborne chemicals. Here, we present a sensitive, microscale, nanospectrophotometric method for quantifying the alkene (C=C bond) content of surface films and demonstrate its applicability in five studies relevant to indoor air chemistry. Collection efficiencies determined for a filter wipe method were ~64%, and the overall detection limit for monoalkenes was ~10 nmol m-2 . On average, painted walls and glass windows sampled across the University of Colorado Boulder campus were coated by ~4 nm thick films containing ~20% alkenes, and a simple calculation indicates that the lifetime for these alkenes due to reaction with O3 is ~1 hour, indicating that the films are highly dynamic. Measurements of alkenes in films of skin oil, pan-fried cooking oils, a terpene-containing cleaner, and on various surfaces in a closed classroom overnight (where carboxyl groups were also measured) provided insight into the effects of chemical and physical processes on film and air composition.

Measurements and modeling of absorptive partitioning of volatile organic compounds to painted surfaces.

Partitioning to surfaces is an important sink for volatile organic compounds (VOCs) indoors, but the mechanisms are not well understood or quantified. Here, a mass spectrometer was coupled to a portable surface reactor and a flow tube to measure partitioning of VOCs into paint films coated onto glass or wallboard, and their subsequent diffusion. A model was developed to extract values of the effective absorbing organic mass concentration of the film, Cw , which is a measure of absorption capacity, and VOC diffusion coefficients, Df , from VOC time profiles measured during film passivation and depassivation. Values of Cw agreed well with the value estimated from the paint film mass and flow tube air volume, and Df values (also measured using attenuated total reflectance-Fourier transform infrared spectroscopy) correlated well with VOC vapor saturation concentrations, C*, estimated using a group contribution method. The value of these relationships for estimating key parameters that control VOC partitioning into paint and the fate of VOCs indoors was demonstrated using a house model, which indicated that >50% of VOCs with C* ≤108  µg/m3 (C* of octane, hexanone, and propanol) that contacted a paint film of typical thickness fully permeated the film regardless of emission duration.

Budgets of Organic Carbon Composition and Oxidation in Indoor Air.

The chemical composition of indoor air at the University of Colorado, Boulder art museum was measured by a suite of gas- and particle-phase instruments. Over 80% of the total observed organic carbon (TOOC) mass (100 µg m-3) consisted of reduced compounds (carbon oxidation state, OSC < -0.5) with high volatility (log10 C* > 7) and low carbon number (nC < 6). The museum TOOC was compared to other indoor and outdoor locations, which increased according to the following trend: remote < rural ≤ urban < indoor ≤ megacity. The museum TOOC was comparable to a university classroom and 3× less than residential environments. Trends in the total reactive flux were remote < indoor < rural < urban < megacity. High volatile organic compound (VOC) concentrations compensated low oxidant concentrations indoors to result in an appreciable reactive flux. Total hydroxyl radical (OH), ozone (O3), nitrate radical (NO3), and chlorine atom (Cl) reactivities for each location followed a similar trend to TOOC. High human occupancy events increased all oxidant reactivities in the museum by 65-125%. The lifetimes of O3, NO3, OH, and Cl reactivities were 13 h, 15 h, 23 days, and 189 days, respectively, corresponding to over 88% of indoor VOC oxidant reactivity being consumed outdoors after ventilation.

Branching Ratios and Rate Constants for Decomposition and Isomerization of ß-Hydroxyalkoxy Radicals Formed from OH Radical-Initiated Reactions of C6-C13 2-Methyl-1-Alkenes in the Presence of NOx.

A series of C6-C13 2-methyl-1-alkenes were reacted with OH radicals in the presence of NOx in a Teflon environmental chamber, and molar yields of the 2-ketone products were measured using gas chromatography. Yields were corrected for secondary reactions with OH radicals and for gas-wall partitioning of the 2-methyl-1-alkene and 2-ketone, with the latter correction being determined from measurements of gas-wall partitioning of 2-ketone standards. Molar yields of 2-ketones decreased with increasing 2-methyl-1-alkene carbon number from a maximum of 0.82 for C6 to a minimum of 0.34 ± 0.02 for C9-C13, which after normalization for the fraction of reaction that occurred by OH radical addition to the C═C double bond (with the rest occurring by H atom abstraction) were 0.86 and 0.39 ± 0.01. These yields were combined with branching ratios determined previously for site-specific OH radical addition to the C═C double bond and for formation of ß-hydroxynitrates to determine branching ratios for decomposition and isomerization of ß-hydroxyalkoxy radicals. Branching ratios for decomposition decreased with increasing 2-methyl-1-alkene carbon number from a maximum of 0.97 for C6 to a minimum of 0.49 ± 0.01 for C9-C13, while the corresponding values for isomerization increased from 0.03 to 0.51 ± 0.01. The results were used to estimate absolute rate constants and activation energies for decomposition and isomerization and were also combined with previously measured yields of ß-hydroxynitrates, dihydroxynitrates, trihydroxynitrates, and H atom abstraction products to obtain yields of ∼75% for the C9-C13 reaction products, with the remainder likely being mostly dihydroxycarbonyls and trihydroxycarbonyls.

Time-Resolved Measurements of Indoor Chemical Emissions, Deposition, and Reactions in a University Art Museum.

A 6-week study was conducted at the University of Colorado Art Museum, during which volatile organic compounds (VOCs), carbon dioxide (CO2), ozone (O3), nitric oxide (NO), nitrogen dioxide (NO2), other trace gases, and submicron aerosol were measured continuously. These measurements were then analyzed using a box model to quantify the rates of major processes that transformed the composition of the air. VOC emission factors were quantified for museum occupants and their activities. The deposition of VOCs to surfaces was quantified across a range of VOC saturation vapor concentrations ( C*) and Henry's Law constants ( H) and determined to be a major sink for VOCs with C* < 108 µg m-3 and H > 102 M atm-1. The reaction rates of VOCs with O3, OH radicals, and nitrate (NO3) radicals were quantified, with unsaturated and saturated VOCs having oxidation lifetimes of >5 and >15 h, making deposition to surfaces and ventilation the dominant VOC sinks in the museum. O3 loss rates were quantified inside a museum gallery, where reactions with surfaces, NO, occupants, and NO2 accounted for 62%, 31%, 5%, and 2% of the O3 sink. The measured concentrations of acetic acid, formic acid, NO2, O3, particulate matter, sulfur dioxide, and total VOCs were below the guidelines for museums.

Nanoporous silicon nitride-based membranes of controlled pore size, shape and areal density: Fabrication as well as electrophoretic and molecular filtering characterization.

A new route will be presented for an all-parallel fabrication of highly flexible, freestanding membranes with well-defined porosity. This fabrication is based on arrays of well-defined Au nanoparticles (NPs) exhibiting a high degree of hexagonal order as obtained in a first step by a proven micellar approach. These NP arrays serve as masks in a second reactive ion etching (RIE) step optimized for etching Si and some important Si compounds (silicon oxide, silicon nitride) on the nanoscale. Application to commercially available silicon nitride membranes of well-defined thickness, delivers a diaphragm with millions of nanopores of intended and controlled size, shape, and areal density with narrow distributions of these parameters. Electrophoretic transport measurements indicated a very low flow resistance of these porous membranes in ionic solutions as expected theoretically. Size-selective separation of protein molecules was demonstrated by real-time fluorescence microscopy.

Electrochemically-Driven Insertion of Biological Nanodiscs into Solid State Membrane Pores as a Basis for "Pore-In-Pore" Membranes.

Nanoporous membranes are of increasing interest for many applications, such as molecular filters, biosensors, nanofluidic logic and energy conversion devices. To meet high-quality standards, e.g., in molecular separation processes, membranes with well-defined pores in terms of pore diameter and chemical properties are required. However, the preparation of membranes with narrow pore diameter distributions is still challenging. In the work presented here, we demonstrate a strategy, a "pore-in-pore" approach, where the conical pores of a solid state membrane produced by a multi-step top-down lithography procedure are used as a template to insert precisely-formed biomolecular nanodiscs with exactly defined inner and outer diameters. These nanodiscs, which are the building blocks of tobacco mosaic virus-deduced particles, consist of coat proteins, which self-assemble under defined experimental conditions with a stabilizing short RNA. We demonstrate that the insertion of the nanodiscs can be driven either by diffusion due to a concentration gradient or by applying an electric field along the cross-section of the solid state membrane. It is found that the electrophoresis-driven insertion is significantly more effective than the insertion via the concentration gradient.

Identification and Quantitation of Aerosol Products of the Reaction of ß-Pinene with NO3 Radicals and Implications for Gas- and Particle-Phase Reaction Mechanisms.

Substantial amounts of gas- and particle-phase organic nitrates have been reported in field studies of atmospheric chemistry conducted around the world, and it has been proposed that a significant fraction of these may be formed from the nighttime reaction of monoterpenes with NO3 radicals. In the study presented here, ß-pinene (a major global monoterpene emission) was reacted with NO3 radicals in an environmental chamber and the molecular and functional group composition of the resulting secondary organic aerosol (SOA) was determined using a variety of methods. Eight products, which comprised ∼95% of the SOA mass, were identified and quantified. More than 90% (by mass) of these consisted of acetal heterodimers and heterotrimers that were apparently formed through acid-catalyzed reactions in phase-separated particles. The molar yield of the major oligomer was 16.7%, and the yields of the other six and the single monomer ranged from 1.1% to 2.9%, for a total yield of 30.7%. From these analyses it was determined that the yields of the two major monomer building blocks were 25.9% and 23.6%, and that those of the other four ranged from 2.0% to 4.8%, for a total monomer yield of 62.4%. The measured SOA mass yield was 88.9% and the O/C, N/C, and H/C ratios, molecular weight, and density of the SOA calculated from the results of functional group analysis of the bulk SOA were 0.40, 0.11, 1.79, 217 g mol-1, and 1.21 g cm-3, respectively, similar to values estimated from results of molecular analysis. The results demonstrate the combined importance of RO2• + RO2• reactions, alkoxy radical decomposition and isomerization, and acid-catalyzed particle-phase reactions in the NO3 radical-initiated oxidation of ß-pinene and subsequent formation of SOA and should be useful for understanding reactions of other monoterpenes and for developing models for the laboratory and atmosphere.

Identification and Quantification of 4-Nitrocatechol Formed from OH and NO3 Radical-Initiated Reactions of Catechol in Air in the Presence of NOx: Implications for Secondary Organic Aerosol Formation from Biomass Burning.

Catechol (1,2-benzenediol) is emitted from biomass burning and produced from a reaction of phenol with OH radicals. It has been suggested as an important secondary organic aerosol (SOA) precursor, but the mechanisms of gas-phase oxidation and SOA formation have not been investigated in detail. In this study, catechol was reacted with OH and NO3 radicals in the presence of NOx in an environmental chamber to simulate daytime and nighttime chemistry. These reactions produced SOA with exceptionally high mass yields of 1.34 ± 0.20 and 1.50 ± 0.20, respectively, reflecting the low volatility and high density of reaction products. The dominant SOA product, 4-nitrocatechol, for which an authentic standard is available, was identified through thermal desorption particle beam mass spectrometry and Fourier transform infrared spectroscopy and was quantified in filter samples by liquid chromatography using UV detection. Molar yields of 4-nitrocatechol were 0.30 ± 0.03 and 0.91 ± 0.06 for reactions with OH and NO3 radicals, and thermal desorption measurements of volatility indicate that it is semivolatile at typical atmospheric aerosol loadings, consistent with field studies that have observed it in aerosol particles. Formation of 4-nitrocatechol is initiated by abstraction of a phenolic H atom by an OH or NO3 radical to form a ß-hydroxyphenoxy/o-semiquinone radical, which then reacts with NO2 to form the final product.

Regional Similarities and NOx-related Increases in Biogenic Secondary Organic Aerosol in Summertime Southeastern U.S.

During the 2013 Southern Oxidant and Aerosol Study, Fourier Transform Infrared Spectroscopy (FTIR) and Aerosol Mass Spectrometer (AMS) measurements of submicron mass were collected at Look Rock (LRK), Tennessee, and Centreville (CTR), Alabama. Carbon monoxide and submicron sulfate and organic mass concentrations were 15-60% higher at CTR than at LRK but their time series had moderate correlations (r~0.5). However, NOx had no correlation (r=0.08) between the two sites with nighttime-to-early-morning peaks 3~10 times higher at CTR than at LRK. Organic mass (OM) sources identified by FTIR Positive Matrix Factorization (PMF) had three very similar factors at both sites: Fossil Fuel Combustion (FFC) related organic aerosols, Mixed Organic Aerosols (MOA), and Biogenic Organic Aerosols (BOA). The BOA spectrum from FTIR is similar (cosine similarity > 0.6) to that of lab-generated particle mass from the photochemical oxidation of both isoprene and monoterpenes under high NOx conditions from chamber experiments. The BOA mass fraction was highest during the night at CTR but in the afternoon at LRK. AMS PMF resulted in two similar pairs of factors at both sites and a third nighttime NOx-related factor (33% of OM) at CTR but a daytime nitrate-related factor (28% of OM) at LRK. NOx was correlated with BOA and LO-OOA for NOx concentrations higher than 1 ppb at both sites, producing 0.5 ± 0.1 µg m-3 for CTR-LO-OOA and 1.0 ± 0.3 µg m-3 for CTR-BOA above 1 ppb additional biogenic OM for each 1 ppb increase of NOx.

Direct Measurements of Gas/Particle Partitioning and Mass Accommodation Coefficients in Environmental Chambers.

Secondary organic aerosols (SOA) are a major contributor to fine particulate mass and wield substantial influences on the Earth's climate and human health. Despite extensive research in recent years, many of the fundamental processes of SOA formation and evolution remain poorly understood. Most atmospheric aerosol models use gas/particle equilibrium partitioning theory as a default treatment of gas-aerosol transfer, despite questions about potentially large kinetic effects. We have conducted fundamental SOA formation experiments in a Teflon environmental chamber using a novel method. A simple chemical system produces a very fast burst of low-volatility gas-phase products, which are competitively taken up by liquid organic seed particles and Teflon chamber walls. Clear changes in the species time evolution with differing amounts of seed allow us to quantify the particle uptake processes. We reproduce gas- and aerosol-phase observations using a kinetic box model, from which we quantify the aerosol mass accommodation coefficient (α) as 0.7 on average, with values near unity especially for low volatility species. α appears to decrease as volatility increases. α has historically been a very difficult parameter to measure with reported values varying over 3 orders of magnitude. We use the experimentally constrained model to evaluate the correction factor (Φ) needed for chamber SOA mass yields due to losses of vapors to walls as a function of species volatility and particle condensational sink. Φ ranges from 1-4.